Filter By:
- Bar Ends (2)
- BMX (18)
- Bottom Brackets (28)
- Brakes/Levers/Pads (71)
- Cables (20)
- Cassettes/Freewheels (32)
- Chainrings (20)
- Chains (38)
- Show More Categories
- Cranksets (16)
- Derailleurs (35)
- Forks (6)
- Handlebar Grips/Tape (47)
- Handlebars (23)
- Headsets (13)
- Pedals (55)
- Saddles (47)
- Seatposts (19)
- Shift/Brake Combinations (4)
- Shifters (24)
- Stems (13)
- Other (65)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts

$24.95
- Durable cold forged CNC machined freewheel
- 3 pawl engagement for stronger hold with engagement every 12 degrees
- New removal notch pattern allows for better frame clearance

$24.95
- Chromoly steel with black oxide finish
- 1.37" x 24tpi right hand thread
- Requires a cog lockring (sold separately)
- Compatible with 1/8-inch chains

$39.95
These inline cross brake levers have super-smooth Delrin bushings, a hinged clamp, drilled-out lever bodies for lighter weight and grip, and angled cable routing to make setup and operation a breeze. They’re designed for 31.8mm handlebars, but with All-City Cross Lever shims (sold separately) they’ll work perfectly with 26.0 as well.
- For use as in-line, secondary brake levers in addition to standard road brake levers
- Hinged clamp fits 31.8 bars; shims for 26.0 sold separately (BR8121)
- Cantilever and caliper brake compatible

$11.95
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull.
- ReachAdjustment
-- Qwik-Adjust Barrel Adjuster
Bend Zone

$20.95 - $24.95
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull.
- Reach Adjustment
- Qwik-Adjust Barrel Adjuster
- Compatible with mechanical disc brakes and linear-pull brakes

$24.95 - $27.95
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$29.95 - $39.95
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$29.95 - $39.95
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$54.95
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

$24.95
Box One Linear Brake Cable Kits are among the most advanced BMX brake cables on the market. The custom Concentric housing includes aramid fiber-wrapped aluminum/steel linear wires for the best combination of strength and low weight. The inner Nano Cable wires are treated with a PTFE coating that reduces friction and boosts braking performance. Our anodized aluminum Kollars ferrules further reduce cable drag.
Each cable kit includes 79 inches of Concentric Linear housing, a black PTFE-coated Nano Cable, four alloy Kollars ferrules and one color-matched and one black alloy cable end caps.
Available in chrome, 14K gold, red, blue and black with alloy Kollars ferrules and end caps.

$2.00
- Axle washers for use with 19mm bottom brackets
- 19.1x26x2.0mm
- Interface: 19mm
- Sold in a 10-pack

$9.95
- Teflon-coated stainless steel inner wire
- Includes cable, housing, ferrules, and cable tips
- Cable length: 2100mm
- Housing length: 1800mm
- Use: Front or Rear
- Length: 2100mm
- Diameter: 1.5mm
- Style: BMX/MTB

$9.95
- BMX brake cable kits for front or rear application
- 1.5mm galvanized inner slick cable
- Cable length: 1700mm / 67-inches
- Housing length: 1750mm / 69-inches

$9.95
- Alloy top cap with hollow bolt to allow for brake cable pass-through
- ED black durable finish
- Size: 1-1/8"

$9.95
- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts
- Clamp Size: 25.4mm
- Material: Alloy

$14.95
- Best seller
- Shock Absorbing Design
- Ridged Turbo Shape
- Fits 7/8" Bars
- Style: with Flange
- Length: 110mm

$14.95
- A comfortable and timeless ribbed style grip suitable for BMX and cruiser use
- High flange BMX style design with black press-in end plugs
- Length: 145mm

$19.95
This BMX quill stem combines a steel rod with an alloy top. The 4-bolt top clamp securely fastens handlebars.

$19.95
- Bottom bracket for one-piece crank
- Sealed mechanism
- 24 TPI
- Spindle Type: One piece
- Cup Material: Steel
- Weight: 310-315g
- Cup Type: Press Fit
- Cup OD/Bearing OD: 51mm

$19.95
- Hinged 2 finger lever
- Forged alloy construction
- 2 piece hinged clamp
- Compatible with caliper and U-brake applications
- Fits 22.2mm (7/8") handlebars
- 166g pair

$24.95
- CNC machined 6061-T6 aluminum chain tensioners
- Compatible with 3/8 inch and 10mm axles
- Single bolt operation makes tensioning a simple task
- Material: 6061AL

$24.95
- Replacement steel sprockets for 1-piece BMX cranks
- Mount Compatibility: 1-piece
- Teeth: 44T
- Chain Compatibility: 1/2 x 3/32"
- Tooth Type: Standard

$29.95
- Allows the use of wheels with 3/8" axles to be used with frames or pegs requiring 14mm axles
- Durable chromoly construction
- Sold in pairs

$29.95
- 4130 chromoly axle pegs with 3 position anti-rotation set screw
- Designed for use with 14mm or 3/8" axles (with adapter)
- 4130 chromoly offers a durable, long lasting peg with a smooth grind
- 3 set screw positions extend the life the of the peg
- Axle: 14mm / 3/8"
- Diameter: 35mm
- Material: Chromoly
- Sold in pairs

$29.95 - $34.95
- CNC machined 6061-T6 alloy
- Fits 1-piece and 3-piece BMX cranks - 23.8mm hole for 1-piece cranks with shims for 19/22mm 3-piece cranks included
- Hard anodized coating
- Unique, 1/8" quiet drive technology
- Mount Compatibility: 1-piece/3-piece
- Chain Compatibility: 1/2" x 1/8"

$29.95
- Compatible with 1-piece BMX cranks
- CNC machined 6061-T6 alloy construction
- Teeth: 25T
- Material: Alloy
- Chain Compatibility: 1/2x 1/8-inch
- Tooth Type: Standard

$29.95
- PIVOTAL Compatible
- Ultra-light 6061 forged alloy construction
- Reinforced wall construction
- Setback: 0mm

$34.95 - $39.95
- Compatible with both American and Mid style BB shells
- 6061-T6 full CNC alloy construction
- Anodized surface finish
- Weight: 255g
- Cup Type: Press Fit
- Cup OD/Bearing OD: 41mm or 51mm

$34.95
- Business in the front, party in the back with these 2-tone BMX saddles
- PVC cover with a colored back strap and steel rails
- Use: BMX
- Rail: Steel
- Cover Material: PVC
- Size (LxW): 260mm x 160mm
- Gender: Unisex

$34.95
- Durable nylon+fiber body
- Heat-treated chromoly spindle
- Molded pins
- Loose ball bearings
- 375g/pair

$39.95
With its alloy/steel construction and 4-bolt clamp design, the MX is a trusty BMX quill stem.
- Quill Length: 4-1/4-inches
- Quill diameter: 21.1mm

$49.95
- Converts a 68mm American style bottom bracket to take a 3-piece 19mm-spindle crank
- Bearings included
- Shell: 68mm
- Interface: American
- Spindle Type: 19mm
- Cup Material: Alloy

$99.95
- Chromoly steel BMX style forks
- Perfect replacement for modern BMX-inspired wheelie bikes
- Steerer Type: Threadless
- Steerer Size: 1-1/8-inch
- Material: Chromoly
- Race Diameter: 30mm
- Axle: 3/8-inch

$75.00
In the Brooks tradition, this bar tape is made of natural leather to make it the perfect complement to your Brooks saddle. The bar tape comes in a kit including:
- 2 strips of light, perforated leather bar tape
- 2 rubber bar end plugs
- 2 adhesive cloth strips
$12.95
• Replacement hoods for road brake levers with traditional, non-aero cable routing
• Soft, tacky rubber for a sure grip
• Available in black or brown

$12.95
• Replacement hoods for Cane Creek SCR5 brake levers
• Soft, tacky rubber for a sure grip
• Available in black or gum

$29.95
Cane Creek's Aheadset is a simple, affordable solution for your headset needs.
• Bearing Type: Cup and Cone
• Color: Black
• Crown Race: 26
• Defined Color: Black
• Lower Stack Height: 12 mm
• S.H.I.S Lower: EC30
• S.H.I.S Upper: EC30
• S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill
• Upper Stack Height: 22 mm
• Weight: 205 g

$29.95
Cane Creek's Aheadset is a simple, affordable solution for your headset needs.
• Bearing Type: Cup and Cone
• Color: Black
• Crown Race: 30
• Defined Color: Black
• Lower Stack Height: 5 mm
• S.H.I.S Lower: ZS44
• S.H.I.S Upper: ZS44
• S.H.I.S. Stem Clamp Diameter: 28.6
• Upper Stack Height: 10 mm
• Weight: 130 g

$39.95
Add another braking option to your road or cross bars with Cane Creek's Cross Top Brake Levers. They are a great way to gain more control on technical cyclocross courses by enabling braking from the tops of the bars.

$99.95
DH / Freeride / All Mountain Chromag utilizes the 35mm clamp size to create a wider, stronger bar in the same weight class as its 31.8 counterpart - the Fubars OSX. The OSX 35 is made from 7000 series aluminum. It provides the best strength to weight ratio possible. This is a strong bar best suited to DH/Freeride or trail riding. At 800mm it is our widest aluminum bar. Same perfect fit as the original OSX, with 25mm rise, 5-degree upsweep and 8-degree back sweep.

$34.95
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.

$54.95
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction pins: 9 per side (mounted from back)
- Inner Bearing type: Igus LL-glide bearing
- Outer Bearing type: Enduro cartridge bearing
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair

$54.95
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction Pins: 9 per side (mounted from back)
- Inner Bearing Type: Igus LL-glide bearing
- Outer Bearing Type: Enduro cartridge bearing
- Shoe Size: US 5-10 // EU 37-43
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair

$54.95
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Body Material: Composite
- Footprint: 100mm x 100mm
- Hex Traction Pins: 9 per side (mounted from back)
- Inner Bearing Type: Igus LL-glide bearing
- Outer Bearing Type: Enduro cartridge bearing
- Shoe Size: US 5-10 // EU 37-43
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 299g per pair

$89.95
Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface.
Details
- Optimal surface area
- Minimal profile 16mm thin
- 10 adjustable 8mm pins per side for grip
- 10mm pins available for purchase here
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU)
- Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU)
- Serviceable, pedal refresh kit available
Specs
- Adjustable pins: 10 per side
- Body Material: A380 Aluminum
- Endcap: T15
- Footprint: 100mm x 100mm (Small), 114mm x 111mm (Large)
- Inner Bearing Type: Igus Bearing
- Max Rider Weight: No restriction
- Outer Bearing Type: Double Cartridge Bearing
- Shoe Size: US 5-10 // EU 37-43 (Small), US 10-15 // EU 43-49 (Large)
- Spindle Material: Forged SCM 415 Chromoly Steel
- Warranty: 5 years
- Weight: 439g per pair (Small), 494g per pair (Large)

$219.95
The Highline 3 delivers infinite adjustment, smooth feel, and easy installation.
Details
- Premium Trelleborg sealing
- Exclusive Igus LL-glide bearings and keys
- Jagwire cable and housing
- Self-contained hydraulic cartridge delivers industry-leading quality and reliability
- Internal routing
- Quick connect mechanism for ease of cable installation
- Linear actuator for quick return speed
- 2-bolt standard head
- Remote sold separately

$31.95
Excellent modulation, cooler temperatures, and great wet weather brake performance. The Black Prince brings the feel of braking on alloy wheels to carbon wheels.
- Pad Type: Replacement Insert-Cartridge
- Intended Brake Type: Caliper
- Rim Compatibility: Carbon

$59.95
The Compound pedals are fully serviceable with sealed bearings and chromoly pins and spindle. These pedals beg you to challenge them as they continue to perform hassle free for as long as you let them. Not only will they surprise you with durability, but the colored composite pedal body never fades or shows wear as the color runs throughout to deliver a fresh pedal day in and day out.
- Lightweight injection-molded nylon fiber composite body
- Replaceable chromoly pins
- Super-thin profile
- DU bushing and double-micro-sealed bearing system
- Fully sealed, rebuildable, thin, and offer the same grip as a traditional aluminum pedal
- Nylon fiber blend does not get hung up on rocks or ledges
- Nylon fiber body does not shatter
- 9/16"

$59.95
With the addition of the DEFTRAP pedal, we sought to revolutionize the expectations for nylon composite pedals. Built around a true concave profile, the top-tier nylon and glass fiber composite material creates a pedal that feels unlike anything on the market.
With a focus on ride quality, increased foot support, added stability, leading traction, and the ability to skim over rocks all offered in 10 colors, the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market.
- All-new pedal design inspired by the world-renowned TMAC pedal
- Injection molded nylon fiber composite body
- Premium nylon glass fiber composite material is 28% stronger than nylon composite used by most leading brands
- Nylon glass fiber blend does not get hung up on rocks
- Non-offset symmetrical design gives the rider perfect weight distribution across the pedal, creating a very stable platform through rough terrain.
- Large 113mm L x 103mm W footprint
- True concave pedal body profile
- 1.5mm of concave shape in the pedal body (per side)
- 18mm thick at the center
- Best-in-class 10 pins per side (8 replaceable steel pins, and 2 fixed nylon pins)
- 2 sealed bearings with oversized DU bushing design is robust and reliable
- Open channeling for optimized mud and snow shedding capabilities
- Not the average plastic disposable pedal...the DEFTRAP Pedals are fully sealed, rebuildable, thin, and offer the same or better grip in comparison to a traditional aluminum pedal
- Brilliant design for all types of riding (Trail, Enduro, Downhill, Dirt Jumping, Commuting)
- 391 grams per pair

$69.95
DEITY's all-new Topside aluminum handlebar utilizes the unique properties of 2014 grade T73 aluminum coupled with DEITY's proprietary Gradient Butting Technology. This high-performance mountain bike handlebar not only looks amazing, but outperforms many of the most expensive bars on the market in both feel and strength.
Designed with DEITY's classic 9-degree backsweep and 5-degree upsweep, the Topside handlebar delivers a 35mm center bore with a wide 800mm stance and 25mm rise for the perfect balance between rider set up and rider experience.
- Oversized 35mm Bore Aluminum Handlebar
- Affordable option to upgrade your OEM handlebar
- Designed for DH / Enduro / All Mountain
- Bead Blast finish with contrast graphics to match the latest gear
- Custom butted 2014 T73 aluminum utilizing our proprietary Gradient Butting Technology
- 800mm wide
- 25mm Rise
- 9 degree bend x 5 degree upsweep
- Features measured cut marks and center alignment detail
- Black ano finish with colored graphics
- Covered by our Lifetime Crash Replacement Policy to the original owner
- Weight: 350 grams

$99.95
The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams, the BLACKLABEL 800 is the evolution of over a decade of DEITY handlebar development. By widening the center bore area, we could increase strength while still delivering an incredibly comfortable, stable, and responsive feel that is unmatched. This premium race good is built for championships!
- 800mm width
- Designed for DH / Enduro / All MTN applications
- Dirt Mag Top 100 Product - 4 years running for 2014, 2015, 2016, and 2018
- Incredibly detailed two-tone bead blast and polished ano finish
- 9-degree bend / backsweep by 5-degree upsweep
- Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology
- Designed for maximum ride quality with a 31.8mm bore
- World Cup DH / Redbull Rampage / Crankworx and FMB World Tour proven
- The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams
- Features measured cut marks and center alignment detail
- Covered by our Lifetime Crash Replacement Policy to the original owner
- 15mm rise: 333g
- 25mm rise: 342g
- 38mm rise: 343g

$10.00
Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility.
- Steel with chrome finish
- Cogs are splined for Shimano BMX and singlespeed hub compatibility
- Compatible with 1/2-inch and 1/8-inch chains

$14.95
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- 430mm length

$19.95
Dimension American bottom bracket for one-piece cranks.
- Include cups, bearings and cones
- 24 tpi

$24.95
Dimension Hand-Stitched Leather Grips, solid color with contrast stitching.
- Classic-style grips for cruisers or mountain bikes
- Flange: No
- Grip Shift Specific: No
- Length: 127mm
- Lock On: No
- Shape: Round
- Weight: 58g

$24.99
Dimension Freewheels are excellent drivetrain component replacements. With smooth shifting performance and durable construction, they'll help breathe new life into older bikes.
- A must have in any bicycle service department
- One-piece design
- Shimano index compatible
- Works with most friction shifters
- Suitable for use with e-bike drivetrains
Page 1 of 10
Next page