Filter By:
- Bar Ends (3)
- BMX (16)
- Bottom Brackets (27)
- Brakes/Levers/Pads (71)
- Cables (21)
- Cassettes/Freewheels (33)
- Chainrings (21)
- Chains (39)
- Show More Categories
- Cranksets (17)
- Derailleurs (30)
- Forks (5)
- Handlebar Grips/Tape (42)
- Handlebars (23)
- Headsets (12)
- Pedals (54)
- Saddles (51)
- Seatposts (19)
- Shift/Brake Combinations (4)
- Shifters (23)
- Stems (13)
- Other (70)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$14.95
- Prevents chain derailment when shifting to inner ring
- Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes

$24.95
- Durable cold forged CNC machined freewheel
- 3 pawl engagement for stronger hold with engagement every 12 degrees
- New removal notch pattern allows for better frame clearance

$19.95
These inline cross brake levers have super-smooth Delrin bushings, a hinged clamp, drilled-out lever bodies for lighter weight and grip, and angled cable routing to make setup and operation a breeze. They’re designed for 31.8mm handlebars, but with All-City Cross Lever shims (sold separately) they’ll work perfectly with 26.0 as well.
- For use as in-line, secondary brake levers in addition to standard road brake levers
- Hinged clamp fits 31.8 bars; shims for 26.0 sold separately (BR8121)
- Cantilever and caliper brake compatible

$24.95
- Chromoly steel with black oxide finish
- 1.37" x 24tpi right hand thread
- Requires a cog lockring (sold separately)
- Compatible with 1/8-inch chains

$11.95
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull.
- ReachAdjustment
-- Qwik-Adjust Barrel Adjuster
Bend Zone

$20.95 - $24.95
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull.
- Reach Adjustment
- Qwik-Adjust Barrel Adjuster
- Compatible with mechanical disc brakes and linear-pull brakes

$24.95 - $27.95
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$29.95 - $39.95
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$29.95 - $31.95
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$54.95
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

$24.95
Box One Linear Brake Cable Kits are among the most advanced BMX brake cables on the market. The custom Concentric housing includes aramid fiber-wrapped aluminum/steel linear wires for the best combination of strength and low weight. The inner Nano Cable wires are treated with a PTFE coating that reduces friction and boosts braking performance. Our anodized aluminum Kollars ferrules further reduce cable drag.
Each cable kit includes 79 inches of Concentric Linear housing, a black PTFE-coated Nano Cable, four alloy Kollars ferrules and one color-matched and one black alloy cable end caps.
Available in chrome, 14K gold, red, blue and black with alloy Kollars ferrules and end caps.

- Melt forged aluminum construction
- 95mm arm length
- Dual tension adjusters
- Front/Rear: Either
- Includes 55mm pads
- 179g each

$2.00
- Axle washers for use with 19mm bottom brackets
- 19.1x26x2.0mm
- Interface: 19mm
- Sold in a 10-pack

$9.95 - $14.95
- Teflon-coated stainless steel inner wire
- Includes cable, housing, ferrules, and cable tips
- Cable length: 2100mm
- Housing length: 1800mm
- Use: Front or Rear
- Length: 2100mm
- Diameter: 1.5mm
- Style: BMX/MTB

$9.95 - $14.95
- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts
- Clamp Size: 25.4mm
- Material: Alloy

$11.95
- Alloy top cap with hollow bolt to allow for brake cable pass-through
- ED black durable finish
- Size: 1-1/8"

$14.95
- Best seller
- Shock Absorbing Design
- Ridged Turbo Shape
- Fits 7/8" Bars
- Style: with Flange
- Length: 110mm

$14.95
- A comfortable and timeless ribbed style grip suitable for BMX and cruiser use
- High flange BMX style design with black press-in end plugs
- Length: 145mm

$19.95
This BMX quill stem combines a steel rod with an alloy top. The 4-bolt top clamp securely fastens handlebars.

$19.95
- Bottom bracket for one-piece crank
- Sealed mechanism
- 24 TPI
- Spindle Type: One piece
- Cup Material: Steel
- Weight: 310-315g
- Cup Type: Press Fit
- Cup OD/Bearing OD: 51mm

$19.95
- Hinged 2 finger lever
- Forged alloy construction
- 2 piece hinged clamp
- Compatible with caliper and U-brake applications
- Fits 22.2mm (7/8") handlebars
- 166g pair

$24.95
- CNC machined 6061-T6 aluminum chain tensioners
- Compatible with 3/8 inch and 10mm axles
- Single bolt operation makes tensioning a simple task
- Material: 6061AL

$29.95
- Allows the use of wheels with 3/8" axles to be used with frames or pegs requiring 14mm axles
- Durable chromoly construction
- Sold in pairs

$29.95
- 4130 chromoly axle pegs with 3 position anti-rotation set screw
- Designed for use with 14mm or 3/8" axles (with adapter)
- 4130 chromoly offers a durable, long lasting peg with a smooth grind
- 3 set screw positions extend the life the of the peg
- Axle: 14mm / 3/8"
- Diameter: 35mm
- Material: Chromoly
- Sold in pairs

$29.95
With its alloy/steel construction and 4-bolt clamp design, the Freestyle is a trusty BMX quill stem.
- Hollow-core stem bolt
- Quill Length: 4-1/4-inches
- Quill diameter: 21.1mm

$29.95 - $34.95
- CNC machined 6061-T6 alloy
- Fits 1-piece and 3-piece BMX cranks - 23.8mm hole for 1-piece cranks with shims for 19/22mm 3-piece cranks included
- Hard anodized coating
- Unique, 1/8" quiet drive technology
- Mount Compatibility: 1-piece/3-piece
- Chain Compatibility: 1/2" x 1/8"

$29.95
- Compatible with 1-piece BMX cranks
- CNC machined 6061-T6 alloy construction
- Teeth: 25T
- Material: Alloy
- Chain Compatibility: 1/2x 1/8-inch
- Tooth Type: Standard

$29.95
- PIVOTAL Compatible
- Ultra-light 6061 forged alloy construction
- Reinforced wall construction
- Setback: 0mm

$34.95 - $39.95
- Compatible with both American and Mid style BB shells
- 6061-T6 full CNC alloy construction
- Anodized surface finish
- Weight: 255g
- Cup Type: Press Fit
- Cup OD/Bearing OD: 41mm or 51mm

$34.95
- Business in the front, party in the back with these 2-tone BMX saddles
- PVC cover with a colored back strap and steel rails
- Use: BMX
- Rail: Steel
- Cover Material: PVC
- Size (LxW): 260mm x 160mm
- Gender: Unisex

$34.95
- Durable nylon+fiber body
- Heat-treated chromoly spindle
- Molded pins
- Loose ball bearings
- 375g/pair

$39.95
With its alloy/steel construction and 4-bolt clamp design, the MX is a trusty BMX quill stem.
- Quill Length: 4-1/4-inches
- Quill diameter: 21.1mm

$49.95
- Converts a 68mm American style bottom bracket to take a 3-piece 19mm-spindle crank
- Bearings included
- Shell: 68mm
- Interface: American
- Spindle Type: 19mm
- Cup Material: Alloy

$99.95 - $149.95
- Chromoly steel BMX style forks
- Perfect replacement for modern BMX-inspired wheelie bikes
- Steerer Type: Threadless
- Steerer Size: 1-1/8-inch
- Material: Chromoly
- Race Diameter: 30mm
- Axle: 3/8-inch

$75.00
In the Brooks tradition, this bar tape is made of natural leather to make it the perfect complement to your Brooks saddle. The bar tape comes in a kit including:
- 2 strips of light, perforated leather bar tape
- 2 rubber bar end plugs
- 2 adhesive cloth strips
$12.95
• Replacement hoods for road brake levers with traditional, non-aero cable routing
• Soft, tacky rubber for a sure grip
• Available in black or brown

$12.95
• Replacement hoods for Cane Creek SCR5 brake levers
• Soft, tacky rubber for a sure grip
• Available in black or gum

$29.95
Cane Creek's Aheadset is a simple, affordable solution for your headset needs.
• Bearing Type: Cup and Cone
• Color: Black
• Crown Race: 26
• Defined Color: Black
• Lower Stack Height: 12 mm
• S.H.I.S Lower: EC30
• S.H.I.S Upper: EC30
• S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill
• Upper Stack Height: 22 mm
• Weight: 205 g

$29.95
Cane Creek's Aheadset is a simple, affordable solution for your headset needs.
• Bearing Type: Cup and Cone
• Color: Black
• Crown Race: 30
• Defined Color: Black
• Lower Stack Height: 5 mm
• S.H.I.S Lower: ZS44
• S.H.I.S Upper: ZS44
• S.H.I.S. Stem Clamp Diameter: 28.6
• Upper Stack Height: 10 mm
• Weight: 130 g

$39.95
Add another braking option to your road or cross bars with Cane Creek's Cross Top Brake Levers. They are a great way to gain more control on technical cyclocross courses by enabling braking from the tops of the bars.

$99.95
DH / Freeride / All Mountain Chromag utilizes the 35mm clamp size to create a wider, stronger bar in the same weight class as its 31.8 counterpart - the Fubars OSX. The OSX 35 is made from 7000 series aluminum. It provides the best strength to weight ratio possible. This is a strong bar best suited to DH/Freeride or trail riding. At 800mm it is our widest aluminum bar. Same perfect fit as the original OSX, with 25mm rise, 5-degree upsweep and 8-degree back sweep.

$34.95
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.

$54.95
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction pins: 9 per side (mounted from back)
- Inner Bearing type: Igus LL-glide bearing
- Outer Bearing type: Enduro cartridge bearing
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair

$54.95
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction Pins: 9 per side (mounted from back)
- Inner Bearing Type: Igus LL-glide bearing
- Outer Bearing Type: Enduro cartridge bearing
- Shoe Size: US 5-10 // EU 37-43
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair

$54.95
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Body Material: Composite
- Footprint: 100mm x 100mm
- Hex Traction Pins: 9 per side (mounted from back)
- Inner Bearing Type: Igus LL-glide bearing
- Outer Bearing Type: Enduro cartridge bearing
- Shoe Size: US 5-10 // EU 37-43
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 299g per pair

$89.95
Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface.
Details
- Optimal surface area
- Minimal profile 16mm thin
- 10 adjustable 8mm pins per side for grip
- 10mm pins available for purchase here
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU)
- Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU)
- Serviceable, pedal refresh kit available
Specs
- Adjustable pins: 10 per side
- Body Material: A380 Aluminum
- Endcap: T15
- Footprint: 100mm x 100mm (Small), 114mm x 111mm (Large)
- Inner Bearing Type: Igus Bearing
- Max Rider Weight: No restriction
- Outer Bearing Type: Double Cartridge Bearing
- Shoe Size: US 5-10 // EU 37-43 (Small), US 10-15 // EU 43-49 (Large)
- Spindle Material: Forged SCM 415 Chromoly Steel
- Warranty: 5 years
- Weight: 439g per pair (Small), 494g per pair (Large)

$219.95
The Highline 3 delivers infinite adjustment, smooth feel, and easy installation.
Details
- Premium Trelleborg sealing
- Exclusive Igus LL-glide bearings and keys
- Jagwire cable and housing
- Self-contained hydraulic cartridge delivers industry-leading quality and reliability
- Internal routing
- Quick connect mechanism for ease of cable installation
- Linear actuator for quick return speed
- 2-bolt standard head
- Remote sold separately

$34.95
- Simple tension seeker (STS) allows the use of a 1 speed drivetrain on a vertical drop frame
- Perfect for street or dirt jump where simplicity and durability is key
- Stainless steel arm mounts to derailleur hanger and dropout
- Loosen bolt and swing down and back to adjust chain tension
- High density polyurethane pulley with sealed cartridge bearings

$49.95
Excellent modulation, cooler temperatures, and great wet weather brake performance. The Black Prince brings the feel of braking on alloy wheels to carbon wheels.
- Pad Type: Replacement Insert-Cartridge
- Intended Brake Type: Caliper
- Rim Compatibility: Carbon

$51.80 - $109.95
The DEITY Highside 35mm handlebar is an homage to style and skill. The DJ/Slopestyle ready Highside 760 handlebar is the perfect reflection of what listening to the athletes can create. This design allows for a stiff, responsive feel that sets the stage to bring your style to life or life to style.
- 7075 T73 Gradient butted aluminum
- Full bead blast finish for increased durability and fatigue resistance

$59.95
The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!

$99.95
The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams, the BLACKLABEL 800 is the evolution of over a decade of DEITY handlebar development. By widening the center bore area, we could increase strength while still delivering an incredibly comfortable, stable, and responsive feel that is unmatched. This premium race good is built for championships!
- 800mm width
- Designed for DH / Enduro / All MTN applications
- Dirt Mag Top 100 Product - 4 years running for 2014, 2015, 2016, and 2018
- Incredibly detailed two-tone bead blast and polished ano finish
- 9-degree bend / backsweep by 5-degree upsweep
- Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology
- Designed for maximum ride quality with a 31.8mm bore
- World Cup DH / Redbull Rampage / Crankworx and FMB World Tour proven
- The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams
- Features measured cut marks and center alignment detail
- Covered by our Lifetime Crash Replacement Policy to the original owner
- 15mm rise: 333g
- 25mm rise: 342g
- 38mm rise: 343g

$10.00
Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility.
- Steel with chrome finish
- Cogs are splined for Shimano BMX and singlespeed hub compatibility
- Compatible with 1/2-inch and 1/8-inch chains
Page 1 of 10
Next page