Filter By:
- Bar Ends (3)
- BMX (15)
- Bottom Brackets (27)
- Brakes/Levers/Pads (72)
- Cables (21)
- Cassettes/Freewheels (33)
- Chainrings (21)
- Chains (38)
- Show More Categories
- Cranksets (17)
- Derailleurs (30)
- Forks (5)
- Handlebar Grips/Tape (42)
- Handlebars (23)
- Headsets (11)
- Pedals (54)
- Saddles (50)
- Seatposts (19)
- Shift/Brake Combinations (3)
- Shifters (24)
- Stems (13)
- Other (68)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$55.00
Serfas delivers superior comfort for those long days on the bike with their Dual Density saddle. The base absorbs shock while the top layer uses gel to conform to your shape giving you frictionless comfort. The anatomic dip relieves pressure from sensitive areas, too.
• Rails: Steel
• Size: 254mm x 178mm
• Weight: 575 Grams
• Cover: Silk-Tech Lycra

$45.00
Giant's Connect Comfort Saddle is ideal for shorter commutes and weekend fitness rides. It wide base with plush padding makes riding comfortable. Plus, the water-resistant synthetic top and steel rails make this one tough, durable saddle.

$5.95
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

$5.95
Power Links provide tool free chain assembly.
- 8-speed width: 7.1mm
- 9-speed width: 6.8mm
- Chain Compatibility: SRAM
- Reusable: Yes

$54.95
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction Pins: 9 per side (mounted from back)
- Inner Bearing Type: Igus LL-glide bearing
- Outer Bearing Type: Enduro cartridge bearing
- Shoe Size: US 5-10 // EU 37-43
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair

$54.95
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction pins: 9 per side (mounted from back)
- Inner Bearing type: Igus LL-glide bearing
- Outer Bearing type: Enduro cartridge bearing
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair

$94.95
Reliable, perfect shifting awaits with Shimano's Deore XT Dyna – Sys Cassette. It features chrome – plated steel sprockets mounted to two aluminum carriers for an ideal blend of durability and low weight. Closer gear ratios in the middle of the cassette ensure you'll have the perfect gear for the trail's ups and downs. Plus, the cogs are ramped and machined for flawless, lightning – fast shifts.

$99.95
The SLX M7100 series of derailleurs deliver advanced shifting performance with decreased tension in the low gear position and an added bumper on the pulley cage. Larger 13T pulleys increase efficiency and chain management while compatibility with Shimano's new 12-speed cassettes boosts range.
- Advanced shifting performance provides the confidence to enjoy any trail
- Fast and shockless shifting
- Hyperglide+
- Extra wide range 12-speed drivetrain
-10-51T (12-speed)
- Silent drivetrain in all gear positions
- Decreased rear derailleur and chain tension in low gear
- New bumper added to rear derailleur pulley cage
- Bump Stopper
- Bigger 13T pulley
- Stable drivetrain on rough terrain
- Low-profile design
- Shimano Shadow RD+

$19.95
- Slightly tapered ergonomic lock-on grip with varying sized blocks to provide improved grip
- Single bolt, black lock on ring
- Press-in end plugs included
- 135mm Length

$34.95
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes.
- 0° Float/fixed type = SM-SH10
- 2° Float/front center pivoting type = SM-SH12
- 6° Float = SM-SH11

$199.95
- Aluminum crank arm and spider with steel spindle
- 4 bolt spider compatible with all XT 8000 series chainring configurations
- Hollowtech II crank arm construction
- Steel driving gear teeth and aluminum support gears
- 96mm P.C.D.
- 176 Q-Factor, 53.4mm OR 50mm chainline
- BB Included: No
- Chainrings Included: No

$40.00
Shimano's 9-sped Alivio crankset is a solid replacement for your tired, worn out cranks. They give you the gears you need to quickly cruise through the city or take on the steepest trails. They are chainguard compatible, so if you're using these cranks on a commuter, your pant cuffs aren't in danger. Plus, the chainrings shift super-quick and precise.

$24.95
Cartridge-style bottom bracket for use with E-Type front derailleurs.
- Smooth rotation
- Square taper spindle
- Sealed cartridge bearing assembly
$14.95 - $19.95
Braking can be fun by adding a pair of real Vans Brake Shoes. Available in assorted colors.
Features:
- Rim friendly compounds
- Threaded steel post
- Steel hardware
Specifications:
- Weight per pair: 56.9 grams
- Overall length: 46.1mm
- Pad contact width: 13.1mm

$24.95
Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts.
- Wheel-type cable guide
- Maximum cog size: 34t
- Total capacity: 43t

$79.95
Salt Cool Knight chain is a super heavy, half-link design chain with integrated guard.
- Links (links): 100
- Color: Silver
- Width: 1/2 x 1/8"
- Drivetrain Speeds: Single Speed
- Chain Connection Type: Pressed Pin
- Half Link Chain: Yes
- Weight: 351 g

$99.95
The Koda was refined through two years of feedback from female testers and has evolved into a saddle that even the boys at the office are fighting over. This saddle boasts all-day comfort and a shape that everyone can enjoy.
- All-day comfort with a generously open channel dividing supportive outer zones to alleviate pressure on your sensitive bits
- Short nose provides seamless on-off transitions while a slightly swooped shape provides an adequate tail to brace against
- Cromoly rails

$24.95
- 7/8 speed design
- Steel inner and outer links with steel chain cage
- Multi-clamp to fit 28.6 – 34.9mm frames
- Multi-pull design
- Total gear teeth: 48
- For seattube angles between 66 - 69 degrees

$32.00 - $39.95
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp.
- 31.8mm can be used with 26.0 bars with additional shim (SM5317)
- Dimension stems are not intended for use with carbon handlebars or carbon steer tubes
- Weight: 130g-180g

$74.95
Shimano Deore XT SM-RT86 6-Bolt rotors feature a 3-layer construction with an aluminum core and two stainless steel outer layers. Reducing rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors, the result is better braking performance and reduced brake fade.
- Aluminum spider
- Includes rotor fixing bolts and locking washers

$64.95
Spank's Tweet 720 handlebars have earned a spot on your dirt jumper. 6 Series aluminum is light and tough, so you can fly high and stick the landing. XGT tech offers a consistent taper for the whole length of the bar, eliminating stress risers for a more durable product.

$149.95
The Shimano Deore XT RD-M8100/M8120 rear derailleur is designed to provide smooth and stable shifting for 12-speed MTB drivetrains.
- Offers fast and shockless shifting
- The low-profile design includes a bumper added to the derailleur pulley cage
- Shimano Shadow RD+ technology reduces chain slap and creates a quieter drivetrain
- Includes large, 13T pulley
- Long cage is designed to be used with 1x12 drivetrain systems
- Rear Derailleur Mount Type: Shimano Rear Direct Mount, 10x1 Standard
- Drivetrain Speeds: 12
- Cage Length: Long
- Chain Wrap Capacity (teeth): 41 teeth
- Largest Cog: 51
- Weight: 284 g
- Rear Der/Shifter Compatibility: Shimano Mountain

$19.95 - $24.95
• Easy-on, easy-off
• Available in two chain widths and two colors
• Available in six teeth sizes

$19.95
Shimano Replacement pads for Mountain brake shoes
- Color: Black
- Intended Brake Type: Linear Pull
- Pad Attachment Style: Threaded Post
- Pad Type: Replacement Insert - Cartridge
- Rim Compatibility: Standard
- Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600
- M70R2: Severe condition brake pad, high performance in dry or wet conditions

$64.95
RaceFace Narrow Wide Chainrings feature tooth profiling for chain retention and a blend of weight and durability suitable for XC, DH, and everything in-between.
- 7075-T6 aluminum, aerospace grade strength
- Compatible with 9, 10, 11 and 12 speed
- Stiff 4mm plate thickness and I-beam construction transfer loads without flexing
- Reversible laser etched graphics
- Non-threaded bolt holes

The all-new Giant Approach is a versatile road saddle that delivers the perfect blend of comfort and support. With an optimized shape and ergonomic cut-out design delivering comfort for a wide variety of riding positions and lightweight, high-elastic PU foam providing maximum support, the Giant Approach saddle delivers true all-around performance for all.
- Optimized shaping delivers comfort in a variety of positions for more riders.
- Optimized rail joint structure.
- Ergonomic cut-out design and high-elastic, free-flowing particles reduce pressure points by more than 20 percent and help distribute pressure across a broader contact area.
- Lightweight, high-elastic PU foam contributes to overall weight savings and provides increased support.
- Giant UniClip Mount System compatible.
- 270mm x 145mm

$44.95
Rain, wind or snow, the Serfas Dual Density Elements saddle saddle can handle it all. The Dual Density Base absorbs vibration while the impermeable cover ensures your saddle stays dry in any condition. An anatomic dip reduces pressure from sensitive areas and the gel layer comforts to your shape so you’ll be comfortable riding for seasons to come.
• Rails: Steel
• Size: 254mm x 178mm
• Weight: 575 Grams
• Cover: Weather-Proof

$64.95
Shimano's XT Ice-Tech rotors utilize their patented Center Lock mounting system for super quick and easy mounting. These rotors use an aluminum core with steel outer plates which reduces the temperature of the braking surface. This means quieter braking, and more importantly, less fade on long downhill sections and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.