Filter By:
- Bar Ends (3)
- BMX (16)
- Bottom Brackets (27)
- Brakes/Levers/Pads (71)
- Cables (21)
- Cassettes/Freewheels (33)
- Chainrings (21)
- Chains (39)
- Show More Categories
- Cranksets (17)
- Derailleurs (30)
- Forks (5)
- Handlebar Grips/Tape (42)
- Handlebars (23)
- Headsets (12)
- Pedals (54)
- Saddles (51)
- Seatposts (19)
- Shift/Brake Combinations (4)
- Shifters (23)
- Stems (13)
- Other (70)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$14.95
- Prevents chain derailment when shifting to inner ring
- Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes

$24.95
- Durable cold forged CNC machined freewheel
- 3 pawl engagement for stronger hold with engagement every 12 degrees
- New removal notch pattern allows for better frame clearance

$19.95
These inline cross brake levers have super-smooth Delrin bushings, a hinged clamp, drilled-out lever bodies for lighter weight and grip, and angled cable routing to make setup and operation a breeze. They’re designed for 31.8mm handlebars, but with All-City Cross Lever shims (sold separately) they’ll work perfectly with 26.0 as well.
- For use as in-line, secondary brake levers in addition to standard road brake levers
- Hinged clamp fits 31.8 bars; shims for 26.0 sold separately (BR8121)
- Cantilever and caliper brake compatible

$24.95
- Chromoly steel with black oxide finish
- 1.37" x 24tpi right hand thread
- Requires a cog lockring (sold separately)
- Compatible with 1/8-inch chains

$11.95
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull.
- ReachAdjustment
-- Qwik-Adjust Barrel Adjuster
Bend Zone

$20.95 - $24.95
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull.
- Reach Adjustment
- Qwik-Adjust Barrel Adjuster
- Compatible with mechanical disc brakes and linear-pull brakes

$24.95 - $27.95
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$29.95 - $39.95
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$29.95 - $31.95
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$54.95
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

$24.95
Box One Linear Brake Cable Kits are among the most advanced BMX brake cables on the market. The custom Concentric housing includes aramid fiber-wrapped aluminum/steel linear wires for the best combination of strength and low weight. The inner Nano Cable wires are treated with a PTFE coating that reduces friction and boosts braking performance. Our anodized aluminum Kollars ferrules further reduce cable drag.
Each cable kit includes 79 inches of Concentric Linear housing, a black PTFE-coated Nano Cable, four alloy Kollars ferrules and one color-matched and one black alloy cable end caps.
Available in chrome, 14K gold, red, blue and black with alloy Kollars ferrules and end caps.

- Melt forged aluminum construction
- 95mm arm length
- Dual tension adjusters
- Front/Rear: Either
- Includes 55mm pads
- 179g each

$2.00
- Axle washers for use with 19mm bottom brackets
- 19.1x26x2.0mm
- Interface: 19mm
- Sold in a 10-pack

$9.95 - $14.95
- Teflon-coated stainless steel inner wire
- Includes cable, housing, ferrules, and cable tips
- Cable length: 2100mm
- Housing length: 1800mm
- Use: Front or Rear
- Length: 2100mm
- Diameter: 1.5mm
- Style: BMX/MTB

$9.95 - $14.95
- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts
- Clamp Size: 25.4mm
- Material: Alloy

$11.95
- Alloy top cap with hollow bolt to allow for brake cable pass-through
- ED black durable finish
- Size: 1-1/8"

$14.95
- Best seller
- Shock Absorbing Design
- Ridged Turbo Shape
- Fits 7/8" Bars
- Style: with Flange
- Length: 110mm

$14.95
- A comfortable and timeless ribbed style grip suitable for BMX and cruiser use
- High flange BMX style design with black press-in end plugs
- Length: 145mm

$19.95
This BMX quill stem combines a steel rod with an alloy top. The 4-bolt top clamp securely fastens handlebars.

$19.95
- Bottom bracket for one-piece crank
- Sealed mechanism
- 24 TPI
- Spindle Type: One piece
- Cup Material: Steel
- Weight: 310-315g
- Cup Type: Press Fit
- Cup OD/Bearing OD: 51mm

$19.95
- Hinged 2 finger lever
- Forged alloy construction
- 2 piece hinged clamp
- Compatible with caliper and U-brake applications
- Fits 22.2mm (7/8") handlebars
- 166g pair

$24.95
- CNC machined 6061-T6 aluminum chain tensioners
- Compatible with 3/8 inch and 10mm axles
- Single bolt operation makes tensioning a simple task
- Material: 6061AL

$29.95
- Allows the use of wheels with 3/8" axles to be used with frames or pegs requiring 14mm axles
- Durable chromoly construction
- Sold in pairs

$29.95
- 4130 chromoly axle pegs with 3 position anti-rotation set screw
- Designed for use with 14mm or 3/8" axles (with adapter)
- 4130 chromoly offers a durable, long lasting peg with a smooth grind
- 3 set screw positions extend the life the of the peg
- Axle: 14mm / 3/8"
- Diameter: 35mm
- Material: Chromoly
- Sold in pairs

$29.95
With its alloy/steel construction and 4-bolt clamp design, the Freestyle is a trusty BMX quill stem.
- Hollow-core stem bolt
- Quill Length: 4-1/4-inches
- Quill diameter: 21.1mm
Page 1 of 20
Next page