Accessories

Whether you're fine-tuning your new full-suspension rig or tuning a fork you've ridden for years, Finish Line's Max Suspension Spray is a pro-grade stiction-fighting stanchion lubricant that maximizes the performance of your suspension. It smooths suspensions that have become dry or dirty and restores full travel and eliminates noise, too. Use Max before rides to ensure maximum responsiveness over the smallest of bumps, and the longest possible travel over extreme terrain. And, use Max to break in new forks or bring old ones back to life. It also conditions and protects rubber seals and O-rings and improves the surface slip of coated stanchions. - Helps suspension forks run more smoothly and quietly - Made with polysiloxane and advanced fluoropolymers

- Precision laser-cut tool steel. - Features 7mm & 8mm flare wrenches plus rotor truing slot. Driven by a request from mechanics in the pits every day, and sure to become a favorite, the Disc Wrench features 7mm and 8mm flare style box wrenches needed for the delicate hose fittings found on hydraulic disc brakes. The compact wrench also features a disc rotor truing slot and is made from precision laser cut tool steel.

- Mini torque wrench preset to 5 newton meters - Includes 3, 4, 5, and 6mm hex bits, T20 and T25 torx bits

Mounts on handlebars higher than standard bells. Sits close to your fingers and doesn't interfere with other handlebar-mounted devices. - Dome Diameter: 40mm (1.57") - Fits handlebars with 22.2mm (.87-inch) outside diameters

They always say, the right tool for the right job. Park's P-handled Torx Wrenches are available in T6, T8, T10, T15, T20, T25, T30 and T40 sizes. They feature offset handles made from durable nylon with a comfortable, ergonomic design. The wrenches are made of high-torque industrial steel for excellent durability.

Park Cone Wrenches are made of durable tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Park's special Y-heads put more material where it's needed for excellent durability and strength. The 28mm size fits newer Shimano 20mm through-axles, as found on XT, XTR and Saint hubs. Most applications require at least 2 cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

Topeak's MondoPack features a unique, positive locking mount that makes attaching and removing the pack a snap. Its streamlined design prevents thigh rub, even when fully loaded and the large main compartment offers plenty of room for carrying tubes, a C02 pump, wallet, keys and whatever else you need. For low-light conditions, 3M reflective strips on three sides add safety and its 1200-denier construction makes the MondoPack durable and tough.

This handy shop aid is ideal for sizing spokes, ball bearings, and crank cotters. To use, just hang the head of the spoke in the oblong hole and read its length on the scale. For crank cotters and ball bearings it works just like a gauge for drill bits. • Has both metric and fractional spoke length markings • Anodized aluminum with embossed markings to allow easy reading and long life

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 23mm size fits Shimano 15mm through-axle hubs. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 24mm wrench fits Shimano 15mm through-axle front hubs and many suspension-fork top caps. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.

• Chrome plated tools • Includes key holder • 2/2.5/3/4/5/6/8/10mm

• High quality precision tool; A must for the serious dealer / cyclist! • Adjustability from 3 to 15 Nm; for all stems / handlebars / seatposts etc • Incl. M3, M4, M5, M6, T25 & T30 Chrome Vanadium sockets and extension • Small and easy to use incl. storage-box

Topeak's Mini Dual G is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. Topeak's thumb-lock head ensures an airtight seal on both Presta and Schrader valves and the built-in gauge lets you top off your tires with precision.

Finish Line's Ceramic Wet Lubricant provides outstanding protection for your drivetrain in even the nastiest conditions. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals so you can spend more time riding and less time on routine maintenance. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line!

Tri-Flow Superior Dry Lubricant was specifically designed to lubricate like an oil and stay clean like a wax. Its exclusive formula includes paraffin wax and high grade petroleum oil which penetrates as it quickly sets up and dries, leaving a thin, visible, coating that repels water as it lubricates. - Specifically designed for lubricating chains - Applicator is not included or needed because of the product's consistency

Topeak's Mini Dual is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, the thumb-lock head ensures an airtight seal on both Presta and Schrader valves.

- Includes basket holder - Carrying handle for off bike use - Polyester powder coating - 11.75" x 8" x 9"

Take the guesswork out of installing cables, wires and housing inside the frame. The IR-1.2 speeds the internal frame routing of electric wires, shift cable/housing, brake cable/housing and hydraulic tubing on carbon fiber, titanium, and aluminum frames. Kit includes four plastic-coated 250cm cables with attached magnets and unique fittings plus an external guide magnet to speed operation. Newly updated to include a dedicated E-tube Di2 cable connector that easily pulls through a 6mm frame hole. Opposite polarity magnets on cables seek and attach inside frame tubes, making it easy to route through frame entrances and exits. Works with any size frame including tandems. A true time and frustration saver!

Y-Style Hex Wrench - Perfect for common hex hardware found on modern bicycles and components. - New improved ergonomic Y-style handle design. - Features refined body shape, quick-spin bit sleeves, longer bits, and bit-size indication. - Designed to stand up to the harsh conditions of professional use. - Pedro's popular Y-Wrenches feature heat-treated tool steel construction and durable plastic body designed to stand up to the harsh conditions of professional use. - The new improved ergonomic design features a refined body shape for improved fit and comfort, new quick-spin bit sleeves for speed and versatility, and bit-size indication for quick tool identification. - Backed by Pedro's lifetime warranty.

- Extra-large hook - Vinyl coated to protect your bike - 2-pc set

The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.

A precision CNC-machined aluminum tool for the installation and removal of select components with 16-notch tool fittings, including bottom brackets, center lock disc brakes, and e-bike motor lockrings. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-69.4 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. Fits 16-notch tool fittings with a major diameter (outside of notches) of 44–45 mm and a minor diameter (inside of notches) of 42.7 mm, including: - Shimano BB80, BB5700, XT BB70, BB51, and previous external bearing threaded bottom bracket cups - Threaded bottom bracket cups from Campagnolo, Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, Wheels, Fulcrum, and others - Center lock disc brake rotor lockrings - Bafang BBSH, BBS02 mid-drive motor lockrings - 3/8" drive fitting

When you want to carry water on your back—and almost nothing else—the Katari 3 has you covered. Low profile but high quality, you'll reach for this pack before your next quick pedal (or ski, or hike) and hardly notice it's there. An airmesh-covered backpanel and rolled soft-edge shoulders deliver excellent ventilation, comfort, and stability, while allowing for full range of motion. A dedicated external sleeve holds an included 2.5-liter reservoir and stretch-mesh side pockets let you grab bars, gloves, and other small essentials on the go. Clip your tail light on the bottom loop to quell any concerns about making it out of the trail before the sun makes its way to the horizon. LOW-PROFILE CARRY - When carrying water and a few essentials are all that's needed, the Katari/Kitsuma provides a lightweight option that rides close to your back for stability on any trail. RESERVOIR INCLUDED - An Osprey Hydraulics LT 1.5L or 2.5L reservoir keeps you hydrated all day long and stores in an external hydration compartment to protect pack contents from accidental spills. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Ridged airmesh-covered foam with center air channel for excellent ventilation BIOSTRETCH HARNESS - Lightweight, ridged airmesh harness provides ventilated comfort - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability - Low-profile design with AirScape backpanel and rolled, soft-edged harness for maximum comfort - Dedicated hydration compartment with included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Magnetic sternum-strap bite-valve attachment - Zippered, scratch-free heat-embossed slash pocket - Loop for blinky-light attachment (light not included) - Dual-stretch-mesh side pockets

Jagwire's Pro Internal Routing Tool simplifies routing through a frame, using powerful magnets to safely and easily guide cables, housing, and e-shift wires. - A retractable, flexible magnet can be inserted into the receiving end of an internal cable run to find the magnetic adapter and easily pull it through - Adapters for inner cables, hydraulic hose, and Di2 e-Tube wires are included - The adapters nest neatly inside tool body when not in use

Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)

Topeak's DeFender FX front fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The FX installs easily to your fork and features quick-release attachments that allow it to be installed and removed in seconds.