Other
$24.95
FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander.
- Includes cap, bolt and expander
- Top assembly for carbon steerers replaces traditional top cap and star nut assembly
$24.95
Rebuild seal kits for Fox rear suspension service and repair.
- Includes parts needed for rebuild
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$25.95
Dimension Stem Column Adaptors
- Total quill length 180mm
- Measurement from minimum insertion to top of steerer adaptor is 118mm
- Alloy
- Quill insertion diameter: 1-inch
$42.00
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
$14.50
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6902 Bearing
$34.95
- Simple tension seeker (STS) allows the use of a 1 speed drivetrain on a vertical drop frame
- Perfect for street or dirt jump where simplicity and durability is key
- Stainless steel arm mounts to derailleur hanger and dropout
- Loosen bolt and swing down and back to adjust chain tension
- High density polyurethane pulley with sealed cartridge bearings
$14.95
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Durable steel construction
- Allows the installation of a straight steerer fork without changing out the headset lower
$2.00
- Axle washers for use with 19mm bottom brackets
- 19.1x26x2.0mm
- Interface: 19mm
- Sold in a 10-pack
$11.95
- Alloy top cap with hollow bolt to allow for brake cable pass-through
- ED black durable finish
- Size: 1-1/8"
$14.95
- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts
- Clamp Size: 25.4mm
- Material: Alloy
$14.95
- Prevents chain derailment when shifting to inner ring
- Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
Previous page
Page 3 of 3