Other

- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes

- Axle washers for use with 19mm bottom brackets - 19.1x26x2.0mm - Interface: 19mm - Sold in a 10-pack

- Alloy top cap with hollow bolt to allow for brake cable pass-through - ED black durable finish - Size: 1-1/8"

- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts - Clamp Size: 25.4mm - Material: Alloy

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction - Allows the installation of a straight steerer fork without changing out the headset lower

- Simple tension seeker (STS) allows the use of a 1 speed drivetrain on a vertical drop frame - Perfect for street or dirt jump where simplicity and durability is key - Stainless steel arm mounts to derailleur hanger and dropout - Loosen bolt and swing down and back to adjust chain tension - High density polyurethane pulley with sealed cartridge bearings

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 3 Pawl Ring Nut

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6902 Bearing

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- Grade 10 chromium steel balls

Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild

FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly

-Seatpost clamp for Defy/Avail Advanced models (2015-2016)

-Seatpost clamp for Defy/Avail Aluxx models (2015-2016)

-Seatpost clamp with rack mount for Giant's Defy/Avail models

- Quick-release seatpost clamp w/rack mount

- Replacement pins for tool shed chain tool. - Bag of 10

-Seatpost clamp for Defy/Avail models (2009-2016)

Seatpost lever and cable set for Giant's Contact Switch Seatpost

Features - E-Bike specific kickstand - Designed to handle the additional weight of battery assisted Giant bicycles - Adjustable leg assures the perfect fit for all frame sizes Fits: - Road-E - Quick-E - Dirt-E - ToughRoad GX-E - Explore-E - Vall-E - Amiti-E

- Raises the stem height of threadless systems without installing a longer steerer tube - Spacers can be placed above or below the stem to fine tune height - Compatible with steel and aluminum steerer tubes only - Includes spacers and top cap

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs

- Compatible with KMC, Shimano 10 speed chains - DLC Coated - Reusable - No Tool Required - Card of 2 pairs

- 2Mm powertex neoprene that prevents nicks and scratches while reducing the noise of chain slap - Tightly stitched with heavy-Duty thread to add extra strength and durability - Jumbo: Taper (95Mm to 85mm and is 254mm in length) - Standard: Taper (85Mm to 75mm and is 254mm in length) - Super jumbo: Taper (117Mm to 107mm and is 254mm in length) - Jumbo 29er: Taper (95 Mm to 85 mm and is 295 mm in length) - Swingarm: Taper (183Mm to 175mm and is 227mm in length)

- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.

- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. - 6061-T6 aluminum construction. - Standard 1-1/8-inch size.